Régie du bâtiment du Québec

  • Français

Searching for a contractor or a licence number: consult the Licence holders' repertory.

Searching for a contractor or a licence number: consult the Licence holders' repertory.

COVID-19: Answers to your questions [Fr]. Due to public health restrictions, the capacity of the exam rooms is reduced to 50%, which may result in some delays.

According to our language policy​​​​​​​, only certain contents may be translated. Visit the French version to obtain all the information.

Determining the required licence

List of subclasses

Retour

15.3 Contractor – Oil burners

This subclass authorizes construction work that is the exclusive domain of master pipe mechanics under the Master Pipe Mechanics Act (CQLR, c. M-4) and relates to oil combustion systems.

It also authorizes construction work included in subclass 15.3.1.

Finally, it authorizes related construction work.   

Additional explanations

Section for contractors

Since November 19, 2001, the “Corporation des maîtres mécaniciens en tuyauterie du Québec” (CMMTQ—Québec Corporation of Master Pipe Mechanics) has been responsible for qualifying its members. It is therefore necessary to address this corporation for any question relating to the interpretation of this subclass.   

CMMTQ
Qualification Department
Tel.: 514 382-2668
Toll-free: 1 800 465-2668
Website: www.cmmtq.org
Email: cmmtq@cmmtq.org

Section for owner-builders

Since the Master Pipe Mechanics Act (CQLR, c. M-4) does not apply to owner-builders, the content of this owner-builder licence subclass is significantly different from that of the contractor’s. For example, this subclass is appropriate for construction work on natural gas burner systems everywhere in Québec, without exception. 

This subclass authorizes, without exceeding the regulatory framework, construction work relating to:

  • the installation of oil stoves, floor oil furnaces, pot-type burners, etc. 
  • the installation and connection of oil burners in a heating unit  
  • the installation of oil supply pipes and connection to the burner   
  • the installation of the oil tank connected to the burner (underground, above-ground, indoor or outdoor)   
  • the installation of wall vents and flue pipes
  • the connection to the chimney
  • the installation and connection of prefabricated oil chimneys  
  • the installation of a flue liner in an oil combustion chimney   
  • the installation of controls and regulators for oil burners
  • the maintenance and demolition of oil combustion systems

If in doubt as to the applicable subclass, refer to the Keyword Index or contact us.

Send us your comments…

Was the information on this page useful to you? (mandatory)