Régie du bâtiment du Québec

  • Français

Searching for a contractor or a licence number: consult the Licence holders' repertory.

Searching for a contractor or a licence number: consult the Licence holders' repertory.

COVID-19: Answers to your questions [Fr]. Due to public health restrictions, the capacity of the exam rooms is reduced to 50%, which may result in some delays.

According to our language policy​​​​​​​, only certain contents may be translated. Visit the French version to obtain all the information.

Determining the required licence

List of subclasses

Retour

15.1.1 Contractor – Pulsed air heating systems for certain work that is not reserved exclusively for master pipe-mechanics

This subclass authorizes maintenance work on pulsed air heating systems, including their propane burner systems. 

It also authorizes construction work on heating systems covered in the first paragraph that is carried out on the territory of a local municipality whose population does not exceed 5,000, unless it has a public sewer, or on an unorganized territory. 

Make sure you have all the required subclasses

Read carefully the definition of this subclass. In addition to subclass 15.1.1, the contractor might also need other subclasses depending on the work he intends to carry out.

Furthermore, this subclass authorizes construction work on pulsed air systems providing heating and air conditioning that is carried out on territories covered in the second paragraph. However, work relating to units allowing heating and air conditioning that are part of such systems cannot be carried out unless the contractor also holds the appropriate subclass 15.9 or 15.10 licence. 

Finally, it authorizes related construction work. 

Additional explanations

Amendments to this subclass have been made and are in force since January 16, 2017. To know what the definition of this subclass was in the former regulation, consult the page Amendments to the subclasses concerning heating, ventilation and refrigeration systems.

To view different scenarios illustrating the sharing of work among subclasses governed by the regulatory amendments, refer to the following document: Description of specialized subclasses concerning heating, ventilation and refrigeration units [Fr].

This subclass is included, in its entirety, in subclass 15.1.1.

This subclass authorizes, without exceeding the regulatory framework, construction work related to the maintenance and demolition of pulsed air heating systems.   

Furthermore, when work is carried out on aforementioned territories (municipality without public sewer, with a population of less than 5,000, or an unorganized territory), it also authorizes construction work relating to: 

  • the installation of heating units
  • the installation or replacement of burners
  • the installation of gas supply pipes and connections to the meter, tank or burner 
  • the installation of fuel supply pipes, the tank and connections to the tank and burner 
  • the installation of wall vents
  • connection to the chimney
  • the installation and connection of prefabricated chimneys  
  • the installation of chimney flue liners
  • the installation of controls and regulators for pulsed air heating systems  
  • maintenance and demolition work on pulsed air heating 
  • the installation of the air distribution system 
  • the installation of the HRV when it is part of the pulsed air heating system. 

Complementary details

Note that this subclass does not include similar work.  

Construction work on a propane burner system (that is not part of a pulsed air heating system) requires a subclass 15.6 licence. 

The contractor carrying out construction work relating to a unit that heats and air conditions must also hold the applicable refrigeration subclass licence (15.9 or 15.10).  

Construction work on an electrical installation is the exclusive domain of contractors or owner-builders holding the subclass 16.0 licence.  

To check whether or not a municipality has a public sewer or find out if its population exceeds 5,000, contact the Ministry of Municipal Affairs and Land Occupancy [Fr].   

Should you have any questions regarding the interpretation of the Master Pipe-Mechanics Act (CQLR, c. M-4) and work reserved exclusively to its members, contact the  “Corporation des maîtres mécaniciens en tuyauterie du Québec (CMMTQ – Québec Corporation of Master Pipe Mechanics), which has had the responsibility of qualifying its members since November 19, 2001.  

CMMTQ
Qualification Department
Tel.: 514 382-2668
Toll-free: 1 800 465-2668
Website: www.cmmtq.org
Email:

If in doubt as to the applicable subclass, refer to the Keyword Index or contact us.

Send us your comments…

Was the information on this page useful to you? (mandatory)